Aquitest AG (Affoltern am Albis)

In our laboratory, which specializes in technical water analyses, everything revolves around the analysis of heating and cooling water. Based on the laboratory values, we advise you on suitable corrosion protection measures.

The water circulating in your system can tell you a lot about the condition of your plant.

An impartial analysis provides clarity about the expected service life of the installation and is the basis for making decisions about appropriate investment protection.

With regular checks, you can detect any corrosion problems at the outset, before damage occurs.

Suitable measures can be derived from the analysis results, which contribute to maintaining the value of the entire heating or cooling installation.

Product description

Aqua Quick Test® During commissioning, the test for filling water and make-up water for commissioning or acceptance according to SWKI guideline BT102-01:2012.

Aqua Basic Test The test for circulating water and system water at flow temperatures ≥ 50°C (without heat pumps) for periodic inspection according to SWKI- guideline BT102-01:2012.

Aqua BasicPlus Tes The test for circulating water and system water for periodic control according to SWKI-guideline BT102-01:2012 for systems with flow temperatures ≤ 50°C such as floor heating systems, heat pumps, refrigeration systems (in case of suspected refrigerant breakthrough or bacterial contamination).

Aqua Multi Test The complete test for circulating water according to SWKI guideline BT102-01:2012. For in-depth clarification before remediation or in case of damage to clarify the cause. Sampling and analysis by an Aquitest employee on site.

Aqua Glycol Test Coolants and antifreeze (glycols) should be checked regularly for effectiveness. Spent inhibitors or incorrect concentration of additives have a corrosive effect.

Additional parameters It is possible to carry out further analyses of the system water. However, this requires a Basic or BasicPlus test.

Aqua Boiler Test For technical assessment of sanitary water in case of corrosion problems in boilers.
Not for assessment according to food law.

Services. Our services are aimed at plumbers, builders, homeowners, plant operators, engineers, planners and manufacturers.

We supply complete sets for system water sampling consisting of:

• Shipping box
• Unbreakable sample bottle 250ml or for boiler water 2 x 1000ml
• Instructions for sampling
• Return label (prepaid depending on the product)
• Questionnaire to fill in the object data and label for the sample bottle

In case of damage or for further clarification we also make on-site analyses.

You will receive the complete laboratory report and the Certificate of Analysis with comparison to the corresponding guideline and an interpretation in German or French by mail. The certificate is intended for the investment book, the sticker on it in the style of a car exhaust vignette should be attached to the heater and reminds you of the next inspection.

Whenever possible, we also send our reports by email to the addresses requested in the questionnaire, so that the results are available in the fastest possible way.

Links to our website

• Aquitest
• Products
• Order
• Contact

Heating water analysis